RESOURCES
Automotive Optics Engineering Resources | TRACE
Engineering guides for automotive lens specification, MTF, distortion, sensor matching, environmental design and custom development.
ENGINEERING GUIDES
System-level answers for automotive optics teams
Automotive camera lens selection: a system-level guide
A system-level framework for selecting automotive camera lenses by sensor, FOV, MTF, distortion, spectral response, package, environment and production needs.
Read guide →ADAS ENGINEERING · 11 MINHow to specify an 8MP ADAS camera lens
Define an 8MP ADAS lens by sensor sampling, full-field MTF, FOV, HDR stray-light behavior, thermal focus stability, CRA, package and production controls.
Read guide →RELIABILITY GUIDE · 10 MINAutomotive lens MTF across temperature: what to specify and verify
Understand thermal focus shift, material behavior, field MTF, tolerance stack-up and camera-level validation for stable automotive imaging across temperature.
Read guide →AVM ENGINEERING · 10 MINSurround-view lens distortion: design for calibration, stitching and perception
Specify fisheye projection, distortion consistency, peripheral MTF, relative illumination, pixel distribution and calibration as one surround-view system.
Read guide →IN-CABIN OPTICS · 11 MINRGB-IR and 940nm lens design for DMS and OMS
Coordinate visible and NIR focus, spectral transmission, sensor response, 850/940nm illumination, flare, FOV and package for reliable in-cabin monitoring.
Read guide →PROGRAM DECISION · 9 MINAutomotive lens platform or custom design: a practical decision framework
Compare existing, modified and fully custom automotive lens paths by sensor fit, performance gap, package, validation, timing, tooling, volume and change risk.
Read guide →SYSTEM MATCHING · 11 MINHow to match an automotive image sensor and camera lens
Match an automotive camera lens to the exact image sensor by optical format, pixel size, image circle, CRA, MTF, filter stack, spectrum, FOV and production tolerance.
Read guide →HDR OPTICS · 10 MINAutomotive camera lens stray light, ghost and flare: how to specify and test
Specify and test automotive camera lens ghost, flare and veiling glare for ADAS using source geometry, contrast loss, coatings, sensor reflections and camera-level validation.
Read guide →PRODUCTION OPTICS · 11 MINAutomotive camera active alignment and tolerance: from MTF target to production yield
Plan automotive camera active alignment by sensitivity, focus, tilt, decenter, full-field MTF, adhesive cure, metrology, end-of-line limits, capability and traceability.
Read guide →RELIABILITY GUIDE · 10 MINAutomotive camera lens reliability validation: build evidence for the mounting location
Plan automotive camera lens reliability by mounting location, climatic and mechanical loads, ingress, chemicals, optical pre/post metrics, sample coverage and change control.
Read guide →